Product Guide

Soft Stone Product Description

About Soft Stone: Innovative Building Materials Originating from Nature
Soft Stone utilizes MCM modified clay technology, blending natural mineral powder and stone powder to create a new type of building material combining natural texture with advanced craftsmanship. Breaking through the limitations of indoor and outdoor applications, it can be applied to large-scale exterior wall cladding as well as interior accent walls, delivering both aesthetic and practical value.

Core Advantages

1. Safety & Health, Ensuring Peace of Mind
  • Waterproof and Moisture-Resistant: Low water absorption rate due to material characteristics, offering exceptional waterproof and moisture-resistant performance to adapt to various environments
  • Fire-Retardant Protection: Tested by the Plastics Industry Development Center to meet the "Grade 1 Flame Retardant" standard, significantly enhancing building safety
  • Non-Toxic and Eco-Friendly: Certified by SGS with "Formaldehyde Not Detected", effectively safeguarding indoor air quality
2. Superior Physical Properties, Easy Installation
  • Lightweight and Flexible: Thickness of only 2~6mm, weight of 3~6kg/m², soft texture with high ductility, earthquake-resistant and crack-proof, directly bendable to fit curved structures such as columns and arches
  • Simple Installation: Strong adhesion, compatible with various adhesives including all-purpose adhesive, nail-free adhesive, and polymer cement mortar, lowering construction barriers and solving industry pain points of difficult installation and labor shortages
3. Outstanding Aesthetics, Recreating Nature
High expressiveness, authentically recreating natural textures such as wood, earth, stone, fabric, and coatings. Realistic visual effects easily create diverse spatial ambiences, perfectly matching various design styles.

Installation Guide

I. Pre-Installation Preparation
  • Substrate Requirements: The wall surface must be flat, dry, free of dust, and free of oil stains; installation must not be carried out on damp or loose substrates
  • Layout and Chalk Line: Perform trial layout according to design drawings, prioritizing full Soft Stone pieces; snap vertical and horizontal control lines as alignment benchmarks after confirming joint widths
  • Cleaning and Protection: Installers must wear gloves and keep hands clean to prevent adhesives, cement, etc., from contaminating the Soft Stone surface
II. Adhesive Selection
  • Nail-Free Adhesive: Suitable for small interior areas, simple installation—apply in an S-shape or strips on the back, press and fix for 24 hours after adhesion
  • Polymer Cement Mortar: Suitable for exterior walls and large-scale installations, high bonding strength; mix with water by ratio, double-sided application (wall and panel back) recommended, cure for at least 24 hours after completion
  • Tile Adhesive: Suitable for both indoor and outdoor large-scale installations, optimal bonding strength; comb into ridges using a notched trowel, double-sided application recommended, reserve 2~3mm expansion joints
III. Core Installation Steps
  1. Adhesion Operation: Install from top to bottom, control adhesive layer thickness within 1-3mm, ensure over 90% mortar coverage rate, adjust position and press/knead evenly before initial set of adhesive
  2. Auxiliary Fixing: If pneumatic nails are needed for assistance, shoot nails at a "slightly tilted" angle to prevent Soft Stone from sliding or joints from widening
  3. Corner Treatment: External corners can be finished with a 45-degree angle, lap joint, or V-shaped profile; internal corners use left-right lap joints to maintain flatness
  4. Cleaning and Touch-up: Wipe surface dirt immediately with a damp sponge; cement adhesive should be gently scraped off during the initial set stage, and can be gently cleaned with a utility blade after complete air drying
IV. Post-Installation Precautions
  • Avoid contact with water, impact, or vibration within 24 hours of completion
  • Joints can be finished with grout or silicone according to the design, or inlaid with metal strips to enhance texture
  • Exterior installations require additional waterproofing treatment

Applicable Scenarios
Soft Stone breaks through indoor and outdoor application boundaries, widely suitable for: large-scale exterior wall cladding, interior accent wall decoration, boutique hotels, high-end clubs, sales and reception centers, and other commercial spaces, home decoration, and old house renovation, combining practicality with aesthetics.